Daily dose of PTC Creo. One stop site for MOST Creo related blogs

Tag ptc creo

Did you know that Tolerance Analysis Extension (TAE) is replaced with Creo EZ Tolerance Analysis in Creo 7.0?

Starting with Creo 7.0, a new solution Creo EZ Tolerance Analysis for tolerance analysis replaces earlier available Tolerance Analysis Extension (TAE). You might have a design that needs an analysis for tolerance stackups in one–dimension (1-D). With this information you… Continue Reading →

Have you tried Deviation Analysis of Generative Design in Creo 7.0?

Starting with Creo 7.0, you can analyze the deviation between the reconstructed surface geometry and the generative design optimized shape. The deviation analysis comparison provides visual and numerical feedback on the proximity of BREP (boundary representation) surfaces to the triangulated… Continue Reading →

Did you know that you can control the default length of intersecting projected contours with Creo 7.0?

Starting with Creo 7.0, you can control the default length of the intersecting projected contours of outlines, that are beyond the point of intersection. You can control the default length of the intersecting projected contours of outlines, that are beyond… Continue Reading →

Did you know that the floor plane can be easily set within Render Studio in Creo?

Starting with Creo 7.0, you can designate custom floor plane for the rendering. You can easily set the floor plane in Render Studio to correctly define your rendering or designate a datum plane or planar surface to be the new… Continue Reading →

Do you know about enhanced Draft Feature in Creo 7.0?

Starting with Creo 7.0, you can select surfaces as references in the Draft surfaces collector even if a draft is previously applied to the surfaces. Drafted analytical surfaces such as cones and drafted ruled surfaces are supported surface types. Easily… Continue Reading →

Have you tried Generative Design Topology Optimization in Creo 7.0?

The new Generative Topology Optimization application, powered by Frustrum, combines topology optimization and simulation algorithms to generate a series of optimized results focused on manufacturing criteria, running seamlessly in Creo Parametric. You can automatically generate design based on critical goals, materials,… Continue Reading →

Did you know that multibody design can be used for injection-molded multimaterial parts in Creo 7.0?

Starting creo 7.0, you can use multiple bodies to make it easier to design your parts that have more than one material. When you design a part that has multiple materials, it requires creating an assembly, managing complex external references,… Continue Reading →

Have you tried align Draft Connection in Freestyle in Creo 7.0?

Starting with Creo 7, you can use Align Draft to align an edge of a Freestyle shape to an external geometry reference at a defined draft angle. You can use the align draft connection to align a one-sided or two-sided edge with an… Continue Reading →

Do you know about the additional options to control Default Datum Plane size in Creo 8.0?

Additional options have been added to control the size of the datum plane. The new options allow you to create datum planes with a preconfigured default size. You can control the default datum size in one of the following ways:… Continue Reading →

Did you know about the Multibody Parts Support in Data Exchange in PTC Creo 7.0?

You can exchange data with Creo Parametric and preserve the design intent of the model, by maintaining the multibody definition. The multibody definition is maintained for exported Creo Parametric 7.0.0.0 geometry and for imported geometry. Information about the support for exchanging data with multibody… Continue Reading →

Do you know that you can create robust bend relief in PTC Creo 8?

The various productivity enhancements in Sheetmetal design include the following: •The improved bend relief for the flushed hems enables a reliable and robust bend relief creation for varying bend position settings. •The new configuration option flat_simp_rep_name allows you to set the default name for a flat simplified representation. •The new lightweight… Continue Reading →

Did you know that Multiple bodies are supported by Sheetmetal Design in PTC Creo?

A multibody part in the Sheetmetal environment can contain the following: •A single body of the category Sheet Metal •Multiple bodies of the category Basic Solid You can work with a sheet metal body in the context of other bodies…. Continue Reading →

Do you know about enhanced standalone annotation capabilities and semantic support for symbols in Creo 8.0?

The standalone symbols now includes support for semantic definition and semantic query, the creation of associated parameters, the designation of symbols as control characteristics, and the report for symbols that are failing in the notification center. The standalone symbols can… Continue Reading →

Do you know that Multibody support is now available for Inseparable Assemblies with Creo 8.0?

Starting from Creo 8.0, inseparable assemblies allow you to create a single file for a multi-component assembly. The common use for an inseparable assembly is a purchased component that you want to include in your model. This component is not… Continue Reading →

Do you know about enhancements of Multibody Design – Pattern References in Boolean Operations in Creo 8.0?

Collectors in Boolean operations that allow the selection of multiple bodies now support the selection of a geometry pattern feature that creates a pattern of bodies. This enables a parametric update of the Boolean operation when the model is regenerated… Continue Reading →

« Older posts

© 2022 PTC Creo Tips — Powered by

Theme by Anders NorenUp ↑