Daily dose of PTC Creo. One stop site for MOST Creo related blogs

Tag GD&T advisor

Have you explored the new semantic reference collection methods in Creo GD&T advisor?

Creo Parametric 12.4.0.0User Interface Location: N/A See the video on the Learning Connector DescriptionPreviously, GD&T Advisor did not support rule-based collections, intent surface references, or datum reference features. As a result, users had to manually select multiple surfaces, which was… Continue Reading →

Have you tried the improved annotation selection experience in Creo GD&T advisor?

Creo Parametric 12.4.0.0User Interface Location: N/A DescriptionPreviously, when creating annotations in GD&T Advisor with geometry displayed in the background, selecting annotations was difficult. Users had to manually switch to the Annotation selection filter to select annotations. Now, when working in… Continue Reading →

Did you know you can use Creo intent surfaces as semantic references in GD&T advisor?

Creo Parametric 12.4.0.0User Interface Location: N/A See the video on the Learning Connector DescriptionPreviously, GD&T Advisor did not support intent surfaces or individual surfaces within the Surface Sets collector.You can now use Creo intent surfaces and collect them as semantic… Continue Reading →

Sketch-based hole patterns now supported in Creo GD&T advisor

Creo Parametric 12.4.0.0User Interface Location: N/A See the video on the Learning Connector DescriptionPreviously, GD&T Advisor did not recognize sketch-based holes as a pattern, which required users to manually select all hole instances. GD&T Advisor now recognizes sketch-based holes as… Continue Reading →

Combined orientation and form tolerances for patterns now supported in Creo GD&T advisor

Creo Parametric 12.4.0.0User Interface Location: N/A See the video on the Learning Connector DescriptionDetailing standards allow orientation and form tolerances to be combined for patterns; however, this capability was previously not supported in GD&T Advisor. With this enhancement, GD&T Advisor… Continue Reading →

Disjointed surface regions now reflected in functional feature callouts in Creo

Creo Parametric 12.4.0.0User Interface Location: N/A See the video on the Learning Connector DescriptionGD&T Advisor automatically identifies cases where a single surface represents multiple disjointed surface region areas and reports the surface region count in the functional features created for… Continue Reading →

Improved support for drafted parts in Creo GD&T advisor for ASME models

Creo Parametric 12.4.0.0User Interface Location: On the GD&T Advisor ribbon, click Edit Properties > Model Type. See the video on the Learning Connector DescriptionPreviously, in some cases, the definition of drafted features for ASME models was not fully compliant with… Continue Reading →

Are you aware of the improved GD&T workflow for general profile tolerances in Creo?

Creo Parametric 12.4.0.0User Interface Location: N/A DescriptionPreviously, users were required to explicitly define a reference plane before creating a functional feature for tapered geometry. Without this depth reference, the feature definition could not be completed. With this enhancement, when a… Continue Reading →

Have you tried controlling flat-to-screen note visibility in GD&T advisor for Creo?

Creo Parametric 12.4.0.0User Interface Location: The option can be set in the GDTAAppOptions.xml file. DescriptionGD&T Advisor now supports the Show_Flat-to-Screen_Notes option, available in the GDTAAppOptions.xml file. This option allows users and CAD administrators to control the display of flat-to-screen notes… Continue Reading →

Have you explored constraining shafts and holes with profile and position in GD&T advisor for Creo?

Creo Parametric 12.4.0.0User Interface Location: In GD&T Advisor Dashboard, select Scheme > Basic Size. DescriptionYou can now constrain simple holes and shafts using a combination of position and surface profile tolerances. This option is available when working with ISO models… Continue Reading →

Did you know GD&T advisor automatically adjusts precision in the edit dimension UI in Creo?

Creo Parametric 12.4.0.0User Interface Location: In the GD&T Advisor feature tree, expand the node of a functional feature. Select the dimension, and then right-click and choose Edit Dimension. DescriptionPreviously, users were required to manually adjust the precision level (number of… Continue Reading →

Are you aware of the new GD&T advisor workflow for creating pattern features without size dimensions in Creo?

Creo Parametric 12.4.0.0User Interface Location: N/A DescriptionIn earlier versions of Creo, creating a pattern feature in GD&T Advisor required a size dimension to be available at the assembly level. If a user attempted to define a pattern feature at the… Continue Reading →

Have you explored the latest GD&T advisor enhancements in Creo?

Release: Creo Parametric 9.0.0.0 Watch a video that demonstrates this enhancement: What is the benefit of this enhancement?Several new enhancements have been introduced in GD&T Advisor to improve usability and productivity. These improvements help streamline workflows and make it easier to apply… Continue Reading →

Have you explored the configuration option in Creo for a custom GD&T advisor options file path?

The new configuration option, gdt_advisor_app_options_file, allows CAD Administrators and users to define a custom location for the GD&T Advisor options file. Creo Parametric 10.0.0.0 Benefits: Additional Information: For more information, Follow this link. Subscribe to this blog for a daily dose… Continue Reading →

Did you know you can set a datum feature from the contextual menu in Creo GD&T advisor?

You can now directly set applicable features as datum features using a new contextual command in the advisor feature tree, without needing to edit the feature. Creo Parametric 10.0.0.0 User Interface Location: Right-click any feature in the feature tree that can… Continue Reading →

« Older posts

© 2026 PTC Creo Tips — Powered by

Theme by Anders Noren — Up ↑